The 201 SS Braided Polishing Hose from NUHU is a high-performance flexible connector designed for residential, commercial, and light industrial plumbing systems. This hose combines a 201 stainless steel braided exterior with a smooth, pressure-resistant inner tube to deliver reliable water flow, exceptional flexibility, and long service life. The polished finish on the braid gives it a clean, professional appearance that works well in visible installations such as sink faucets, toilet connections, and water heater supply lines.
NUHU has spent two decades refining the production of braided stainless steel hoses. Every 201 SS Braided Polishing Hose undergoes rigorous testing before it leaves the factory. The braiding process ensures uniform wire tension, which prevents bulging under pressure and reduces the risk of pinhole leaks. The inner tube is extruded from either food-grade EPDM or PVC, depending on the intended use, and the end fittings are machined to exact thread specifications. This attention to detail means fewer callbacks for plumbers and peace of mind for homeowners.
This guide covers the full technical specifications, material composition, installation procedures, maintenance tips, and answers to the most common questions about the 201 SS Braided Polishing Hose. Whether you are a contractor specifying components for a new build or a DIY enthusiast replacing an old connector, the information below will help you get the best performance from NUHU hose products. This series includes products such as Double Lock Polished 1.5m 201 SS Braided Hose, etc.
The polished surface of the 201 SS Braided Polishing Hose is easy to maintain. Wipe the braid with a soft, damp cloth to remove dust, soap residue, or hard water spots. For stubborn stains, use a mild dish soap diluted in warm water. Avoid using abrasive pads, steel wool, or acidic cleaners, as these can scratch the polished finish and reduce corrosion resistance. Never use chlorine bleach or strong alkaline solutions directly on the braid.
Inspect the hose every six months as part of routine plumbing maintenance. Look for signs of bulging, frayed braid wires, greenish corrosion on brass fittings, or water staining around the crimp collars. If any of these conditions are present, replace the hose immediately. Even if no visible damage is found, consider replacing braided hoses every five to eight years as a preventive measure, especially in areas with hard water or high chlorine content. The 5-year warranty from NUHU covers manufacturing defects, not normal wear or damage caused by improper installation.
